SENSOR TECHNOLOGY

SENSOR LUMINAIRES


The sensor we have developed includes an infrared motion detector and a constant light controller. The motion detector switches the respective luminaire on/off depending on perceived movement. The constant light controller dims the light in accordance to the level of ambient brightness. The basic settings can be customised as desired using the remote control provided.

The following special functions are available, for example:

• Adjustment of the sensitivity trigger of the motion detector
• Adjustment of the start scene (for example, indirect instead of direct / indirect)
• Manual initial switching on / off of the luminaire despite activated motion detector
• Temporary deactivation of the constant light controller through manual dimming


LIGHTDIM CONNECT – SWARM

To guarantee the optimal basic illumination in open structures e.g. open-plan spaces with sensor luminaires, the luminaires can be fitted with LIGHTDIM CONNECT..

The luminaires are linked by a radio signal. Even in areas where no movement is registered, they can be programmed to not switch off completely, but illuminate with reduced brightness, until the last person has left the room. Room zoning, individual planning and programming is possible.


LIGHTDIM CONNECT – SPECIAL FUNCTIONS

The automatic activation of the luminaires by the motion detector can cause unrest in open spaces.

By activating the special function - manual first switching - the respective luminaires are not automatically switched on despite motion detection. The motion detector ist activated only by manually switching on the luminaire.


LIGHTDIM CONNECT – SHARED OFFICE (IN PREPARATION)

LIGHTDIM CONNECT luminaires will also be suitable for the shared office. Information about office utilisation and free work stations can be made available with this module.